Optimization of Closure Law of Guide Vanes for an Operational Hydropower Plant of Nepal

Authors

  • Saroj Chalise Student, Department of Mechanical Engineering, IOE Pulchowk Campus, NEPAL
  • Dr. Laxman Poudel Professor, Department of Mechanical engineering, IOE Pulchowk Campus, NEPAL

DOI:

https://doi.org/10.31033/ijemr.9.5.12

Keywords:

Guide Vanes, Closure Law, Optimization, Non-Linear Objective Function, Hydropower

Abstract

This paper addresses the optimization of two-stage closure law of guide vanes in an operational hydropower plant of Nepal. The mathematical model has been established in commercial software Bentley Hammer, whose correctness has been validated by comparing the results with the data of experimental load rejection test. The validated mathematical model has been employed to find the parameters of optimum closure pattern, which minimizes the non-linear objective function of maximum water pressure and maximum rotational speed of turbine.

Downloads

Download data is not yet available.

Downloads

Published

2019-10-31
CITATION
DOI: 10.31033/ijemr.9.5.12
Published: 2019-10-31

How to Cite

Saroj Chalise, & Dr. Laxman Poudel. (2019). Optimization of Closure Law of Guide Vanes for an Operational Hydropower Plant of Nepal. International Journal of Engineering and Management Research, 9(5), 73–79. https://doi.org/10.31033/ijemr.9.5.12

Issue

Vol. 9 No. 5 (2019): October Issue

Section

Articles

License

Research Articles in 'International Journal of Engineering and Management Research' are Open Access articles published under the Creative Commons CC BY License Creative Commons Attribution 4.0 International License http://creativecommons.org/licenses/by/4.0/. This license allows you to share – copy and redistribute the material in any medium or format. Adapt – remix, transform, and build upon the material for any purpose, even commercially.

Similar Articles

<< < 1 2 3 4 5 6 7 8 9 10 > >> 

You may also start an advanced similarity search for this article.