Numerical Simulation of Helically Coiled Closed Loop Pulsating Heat Pipe

Authors

  • Bhagwat Adhikari Student, Department of Mechanical Engineering, IOE-Pulchowk Campus, NEPAL
  • Dr. Sanjeev Maharjan Professor, Department of Mechanical Engineering, IOE-Pulchowk Campus, NEPAL

DOI:

https://doi.org/10.31033/ijemr.9.2.26

Keywords:

Helical, pulsating heat pipe, simulation, thermal resistance

Abstract

This paper addresses the numerical simulation of helically coiled closed loop pulsating heat pipe which is carried in ANSYS Fluent. The values of thermal resistance for constant heat fluxes vs. transient heat fluxes are analyzed. Phase change visualization after the end of simulation is carried out to observe the phenomenon in liquid at its saturation temperature and pressure. Finally, helical heat pipes are found to have thermal resistance less by 2.7K/W, 0.56 K/W, and 0.227 K/W for 8W, 40W and 80W heat inputs than circular pipes. Helical heat pipes are found more efficient than circular heat pipes.

Downloads

Download data is not yet available.

Downloads

Published

2019-04-30
CITATION
DOI: 10.31033/ijemr.9.2.26
Published: 2019-04-30

How to Cite

Bhagwat Adhikari, & Dr. Sanjeev Maharjan. (2019). Numerical Simulation of Helically Coiled Closed Loop Pulsating Heat Pipe. International Journal of Engineering and Management Research, 9(2), 206–212. https://doi.org/10.31033/ijemr.9.2.26

Issue

Vol. 9 No. 2 (2019): April Issue

Section

Articles

License

Research Articles in 'International Journal of Engineering and Management Research' are Open Access articles published under the Creative Commons CC BY License Creative Commons Attribution 4.0 International License http://creativecommons.org/licenses/by/4.0/. This license allows you to share – copy and redistribute the material in any medium or format. Adapt – remix, transform, and build upon the material for any purpose, even commercially.

Similar Articles

<< < 2 3 4 5 6 7 8 > >> 

You may also start an advanced similarity search for this article.