Classification of Metals used in the Sand Casting Process

Authors

  • A. Arun Student, Department of Mechanical Engineering, Saranathan College of Engineering, Anna University, Tiruchirappalli, Tamil Nadu, INDIA
  • R. BalaKrishnan Student, Department of Mechanical Engineering, Saranathan College of Engineering, Anna University, Tiruchirappalli, Tamil Nadu, INDIA
  • R. Jayanthi Student, Department of Mechanical Engineering, Saranathan College of Engineering, Anna University, Tiruchirappalli, Tamil Nadu, INDIA
  • H M S. Kevin Student, Department of Mechanical Engineering, Saranathan College of Engineering, Anna University, Tiruchirappalli, Tamil Nadu, INDIA
  • A. Ranjith Raj Professor, Department of Mechanical Engineering, Saranathan College of Engineering, Anna University, Tiruchirappalli, Tamil Nadu, INDIA
  • S. Paramaguru Professor, Department of Mechanical Engineering, Saranathan College of Engineering, Anna University, Tiruchirappalli, Tamil Nadu, INDIA
  • R. Kumar Professor, Department of Mechanical Engineering, Saranathan College of Engineering, Anna University, Tiruchirappalli, Tamil Nadu, INDIA
  • M. Ganesan Professor, Department of Mechanical Engineering, Saranathan College of Engineering, Anna University, Tiruchirappalli, Tamil Nadu, INDIA
  • R. Rekha Professor, Department of Mechanical Engineering, Saranathan College of Engineering, Anna University, Tiruchirappalli, Tamil Nadu, INDIA

DOI:

https://doi.org/10.31033/ijemr.11.2.2

Keywords:

Sand Casting, Casting Software, Metals

Abstract

The Sand Casting Process And The Different Methods Used To Cast The Metals Are The Subjects Of This Paper. Casting Is A Manufacturing Process For Creating Complex Material Shapes. A Large Classification Is Needed To Understand The Metals Used By Researches, Why They Were Used, And What The Most Commonly Used Metal For Their Research Is. We Studied And Understanded The Various Types Of Sand Casting Processes Used By The Researchers In This Review Paper. And We Categorized And Graded All The Papers We Reviewed And Classified Based On Their Respective Study Areas And Material Use.

Downloads

Download data is not yet available.

Downloads

Published

2021-04-30
CITATION
DOI: 10.31033/ijemr.11.2.2
Published: 2021-04-30

How to Cite

A. Arun, R. BalaKrishnan, R. Jayanthi, H M S. Kevin, A. Ranjith Raj, S. Paramaguru, … R. Rekha. (2021). Classification of Metals used in the Sand Casting Process. International Journal of Engineering and Management Research, 11(2), 13–19. https://doi.org/10.31033/ijemr.11.2.2

Issue

Vol. 11 No. 2 (2021): April Issue

Section

Articles

License

Research Articles in 'International Journal of Engineering and Management Research' are Open Access articles published under the Creative Commons CC BY License Creative Commons Attribution 4.0 International License http://creativecommons.org/licenses/by/4.0/. This license allows you to share – copy and redistribute the material in any medium or format. Adapt – remix, transform, and build upon the material for any purpose, even commercially.

Similar Articles

1 2 3 4 5 6 7 8 9 10 > >> 

You may also start an advanced similarity search for this article.