An Experimental Investigation of Material Removal Rate on H-13 Die Tool Steel on EDM Using Taguchi Techniques

Authors

  • Ankit Kumar M.Tech Student Department of Mechanical Engineering, Dronacharya College of Engineering, Haryana, INDIA
  • Poshan Lal Sahu Assistant Professor, Department of Mechanical Engineering, Dronacharya College of Engineering, Haryana, INDIA

DOI:

https://doi.org/10.31033/ijemr.10.3.21

Keywords:

EDM, H-13 Die Tool Steel, Pulse on Time, Peak Current and Feed Rate, Material Removal Rate, Taguchi Technique

Abstract

H-13 is die tool steel, it have widely applications in the Hot punches and dies for blanking, bending, swaging and forging, Hot extrusion dies for aluminum, cores, ejector pins, inserts, Nozzles for aluminum, tin and lead die casting, Hot shear blades etc. as the H-13 steel has widely applications so it is chosen for the present study. Presents works shows the effect of various process parameters like peak current, Pulse on Time and Feed rate on Material Removal Rate. EDM Drilling and Taguchi technique is used for the optimization of response variables.

Downloads

Download data is not yet available.

Downloads

Published

2020-06-30

How to Cite

Ankit Kumar, & Poshan Lal Sahu. (2020). An Experimental Investigation of Material Removal Rate on H-13 Die Tool Steel on EDM Using Taguchi Techniques. International Journal of Engineering and Management Research, 10(3), 142–148. https://doi.org/10.31033/ijemr.10.3.21

Issue

Vol. 10 No. 3 (2020): June Issue

Section

Articles