Microstructure Analysis of Glass/Epoxy Structure Reinforced with Multi- Walled Carbon Nanotubes

Authors

  • Vivek Balachandran Student, Department of Mechanical Engineering, RCET, Bhilai, INDIA
  • Sandeep Gupta Assistant Professor, Department of Mechanical Engineering, RCET, Bhilai, INDIA

DOI:

https://doi.org/10.31033/ijemr.8.5.01

Keywords:

MWCNTs, Sonication, Frequency Test, SEM, TEM & OM

Abstract

This work involves extensive experimental work to analyses the natural frequency of glass/epoxy honeycomb structures reinforced with 0 %, 0.5 %, 1 % and 1.5 % respectively which are prepared by hand layup method followed by vacuum bagging technique. An experimental investigation is carried out using modal analysis technique, to obtain the natural frequencies and the results show significance influence of the carbon nano tube on the natural frequency. Further microstructure analysis were also
performed to analyze the surface integrity and dispersion of multi-walled carbon nano tubes in glass/epoxy composites.

Downloads

Download data is not yet available.

Downloads

Published

2018-10-31

How to Cite

Vivek Balachandran, & Sandeep Gupta. (2018). Microstructure Analysis of Glass/Epoxy Structure Reinforced with Multi- Walled Carbon Nanotubes. International Journal of Engineering and Management Research, 8(5), 29–36. https://doi.org/10.31033/ijemr.8.5.01

Issue

Vol. 8 No. 5 (2018): October Issue

Section

Articles

License

Copyright (c) 2018 Vivek Balachandran, Sandeep Gupta

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.